Good n Ugly carbide wearbars

Good ‘n Ugly Carbides Outlast Competitors 2 to 1 

They’re not pretty… just the longest lasting single carbide on the market

Good n Ugly wear bars

For many trail riders, good, reliable, long lasting wear bars are what they need. Our Good ’n Ugly Carbides are exactly that… the longest lasting single carbide wear rod on the market. 

Good ’n Ugly Carbides feature 4”, 6”, or 8” of diamond shaped carbide centered on a 1/2” round bar. The carbide is surrounded on each end with a full length of hardsurfacing, tapered on both ends to extend the life of the bar and the carbide. The carbide penetrates into the host bar as far as it extends out, so the carbide will never fall out unless the host bar is completely worn out . And we never use wear pads, which actually generate wear patterns and create drag.

Good ’n Ugly Benefits

Good n Ugly wear bars
Good ‘n Ugly Carbide orders include Ski Saver
Good n Ugly carbides

Why do we call them Good ’n Ugly?

Making the most durable carbide wear rods on the market has never been cheap. The alloy we use is very durable, but difficult to work with, so they never look pretty. A less durable alloy would make it prettier, but less durable! 

To reduce cost we do not remove the excess weld or braze material. This has absolutely no effect on function. Since wear rods bolt onto the bottom of the skis, being “pretty” has never been a priority.

Snowmobilers can decide if they want durable Good ’n Ugly Carbides or just “pretty” fair carbides.

Are Good ‘n Ugly Carbides right for me?

Check out our Carbide Selection Guide to find out

Hard Surface Wear Bars
Good n Ugly carbides

For snowmobiles and skis that don’t need carbides, we offer hard surface wear bars. Our hard surface wear bars use the same host bar as our Good ‘n Ugly bars, but without the carbide. Then we add a full length of hardsurfacing for durability.

4” Good ’n Ugly Carbides (pr.) $120 (US) / $139 (CA)    |   6” Good ’n Ugly Carbides (pr.) $140 (US) / $159 (CA)    |   8” Good ’n Ugly Carbides (pr.) $160 (US) / $179 (CA)    |   Hard Surface Wear Bars (pair) – $70 (US) / $80 (CA) 

4” Good ’n Ugly Carbides (pr.)
 $120 (US) /$139 (CA)

6” Good ’n Ugly Carbides (pr.)
 $140 (US) / $159 (CA)

8” Good ’n Ugly Carbides (pr.)
$160 (US) / $179 (CA)

Hard Surface Wear Bars (pair)
 $70 (US) / $80 (CA)

Scroll to Top

Help me get in control!

Need help figuring out which carbide is best for you? Call Sandy (U.S.) or Clark or Clayton in Canada.

U.S. Orders

Canadian Orders

Call Sandy at 1-833-WEARBAR (833-932-7227) 

Or fill out the form below

Call Clark905-809-1390 or Clayton905-404-4601

Or fill out the form below

U.S. Orders

Call Sandy at 833-WEARBAR 
(833-932-7227) 

Or fill out the form below

Canadian Orders

Call Clark905-809-1390 or Clayton905-404-4601

Or fill out the form below

I’d like to order the following. 

We will contact you to verify your order and get your payment information.

Triple Point Order

Select Country to Send Order

Select country

My name, address information

Contact me by

I’d like to order wearbars for the following snowmobile

Need wearbars for multiple snowmobiles? Call Sandy (U.S.) or Clark (Canada) to place your order.

Engine
Ski (specify model/make)

Note: All Pilot X Skis require stops. Order stops separately. 2-stroke or 4-stroke specific.

Shim kits are not available for Pilot X skis.

Choose your wearbar

Prices shown do not include shipping or tax. Tax and shipping will be added to the invoice.

Select wearbar (select size below)
Triple Point Carbides
Good ‘n Ugly Carbides
Hard Surface Wearbars
Include Rubber Dampers/Stops?
Trail Grabbers

Order other accessories separately from any accessory page on this site

Select Store to Shop

Help me get in control!

Need help with the accessories you need? Call Sandy (U.S.) or Clark or Clayton in Canada.

U.S. Orders

Canadian Orders

Call Sandy at 1-833-WEARBAR (833-932-7227) 

Or fill out the form below

Call Clark905-809-1390 or Clayton905-404-4601

Or fill out the form below

U.S. Orders

Call Sandy at 833-WEARBAR
(833-932-7227) 

Or fill out the form below

Canadian Orders

Call Clark905-809-1390 or Clayton905-404-4601

Or fill out the form below

I’d like to order the following accessories. 

We will contact you to verify your order and get your payment information.

Accessories Order

Select Country to Send Order

Select country

My name, address and snowmobile information

Contact me by
Engine
Ski Model

I’d like to order the following products

Prices shown do not include tax. Tax will be added to invoice.

Trail Grabbers
Ski Savers
Rubber Dampers / Stops
Shim Kits

Shim kits include shipping

Contours

Help me get the fun back!

Tell me how I can get my sled under control and put the fun back in snowmobiling. 

Bergstrom Skegs products are now available to order in the U.S. and in Canada. 

In the U.S.

In Canada

Call Sandy at 833-WEARBAR (833-932-7227) 

Or fill out the form below

Call Clark905-809-1390  or  Clayton905-404-4601

Or fill out the form below

In the U.S.

Call Sandy at 833-WEARBAR
(833-932-7227) 

Or fill out the form below

In Canada

Call Clark905-809-1390  or  Clayton905-404-4601

Or fill out the form below

Please select where you want to direct your inquiry and fill out the information below.

Contact form

Select Country to Send Inquiry

Select country

I’d like some more information

Complete the form below and tell us what you’re interested in.
Contact me by
I’m interested in