Contact Us
Go to: Arctic Cat Polaris Ski-doo Yamaha
| Arctic Cat |
| 3/8" round host bar [without a bend] |
| 3" of 120 degree carbide - blunt ends |
| NO WEAR PADS |
| 1991 - B08 |
| x |
| 3/8" round host bar |
| 3" of 120 degree carbide - blunt ends |
| NO WEAR PADS |
| 1992 - B09 |
| x |
| 3/8" round host bar |
| 3" of 120 degree carbide - blunt ends |
| 1" x 1/4" x 1/16" wear pads front & back |
| Sharp corners - blunt front |
| 1987 - B10 |
| x |
| 7/16" round host bar |
| 3" of 120 degree carbide - blunt ends |
| Hardweld complete |
| NO WEAR PADS |
| 1988 - H04 |
| x |
| 7/16" round host bar |
| 3" of 120 degree carbide - blunt ends - full channel |
| Hardweld complete |
| NO WEAR PADS |
| 1988 - H04 |
| x |
| 7/16" flat top host bar |
| 3" of 120 degree carbide - blunt ends - full channel |
| Hardweld complete |
| NO WEAR PADS |
| 1997 - H04 |
| x |
| 1/2" round host bar |
| 6" of 90 degree carbide - tapered ends - full channel |
| 1/2" wear pads - front & back |
| Hardweld complete |
| 1989 - H04 |
| x |
| 1/2" flat top host bar |
| 6" of 60 degree carbide - tapered ends - full channel |
| Hardweld complete |
| NO WEAR PADS |
| 1997 - H04 |
| x |
| 3/8" round host bar |
| 3" of 90 degree carbide - tapered ends |
| 1" wear pads front & back - tapered fronts |
| 1985 - K13 |
| x |
| 3/8" round host bar |
| 2" of 90 degree carbide - tapered |
| 7 1" wear pads alternating every other inch |
| 1985 - K13 |
| x |
| 3/8" round host bar |
| 3" of 90 degree carbide - tapered ends |
| 1" wear pads front & back - tapered both ends |
| 1993 - K16 |
| x |
| 3/8" round host bar |
| 3" of 90 degree carbide - tapered ends |
| 1" wear pads front & back - tapered both ends |
| 1994 - K18 |
| x |
| 1/2" round host bar with 3/8" round host bar ends |
| 4" of 90 degree carbide - blunt ends - full channel |
| 2 1" 90 degree approx. 1" from 4" section front & back |
| 1" wear pads front & back - tapered fronts |
| 1994 - K18 |
| x |
| 3/8" round host bar |
| 3" of 90 degree carbide - tapered ends |
| 1" wear pads front & back - tapered both ends |
| 1995 - K19 |
| x |
| 3/8" round host bar |
| 3" of 90 degree carbide - tapered ends - full channel |
| 1" wear pads front & back - tapered fronts |
| 1995 - K19 |
| x |
| 3/8" round host bar |
| 3" of 90 degree carbide - tapered ends |
| 1" wear pads 2 in front & 1 in back - tapered both ends |
| 1996 - K20 |
| x |
| 7/16" round host bar |
| 3" of 90 degree carbide - tapered ends |
| 1" wear pads front & back - tapered both ends |
| 1997 - K21 |
| x |
| 7/16" round host bar |
| 5" of 90 degree carbide - tapered ends |
| 1" wear pads front & back - tapered both ends |
| 1997 - K22 |
| x |
| 3/8" round host bar - 3" taper on back end |
| 4" of 90 degree carbide - tapered ends |
| 1" wear pads front & back |
| Hardweld complete |
| 1983 - Q09 |
| x |
| 3/8" round host bar |
| 3" of 90 degree carbide - tapered ends |
| NO WEAR PADS |
| 1992 - Q13 |
| x |
| 3/8" round host bar |
| 3" of 90 degree carbide - tapered ends |
| Hardweld complete |
| NO WEAR PADS |
| 1992 - Q13 |
| x |
| 3/8" round host bar |
| 4" of 90 degree carbide - tapered ends |
| 1" wear pads front & back |
| Hardweld complete |
| 1992 - Q13 |
| x |
| 7/16" round host bar |
| 3" of 90 degree carbide - tapered ends |
| NO WEAR PADS |
| 1997 - Q14 |
Home | Main traction history page | Site Map
Copyright © 1999-2016 Bergstrom Skegs, Inc.
All
rights reserved.